We are a unique entity in the industry, actively committed towards manufacturing, exporting and supplying the optimum quality range of PE Tarpaulin. Our provided tarpaulin has multiple uses like shelter from the elements for example wind, rain, or sunlight, a ground sheet. At our well-equipped premises, our ingenious professionals using quality assured polyethylene with the aid of ultra modern machines. In addition to this, the offered PE Tarpaulin can be availed from us at pocket friendly prices by our valued clients.
Technical specifications | |
Size | Reinforced plastic tarpaulin in 4m x 6m sheet or 4m x 60m roll |
Material | Woven high-density polyethylene (HDPE) black fibers fabric, fabric laminated on both sides with white low density polyethylene (LDPE) coating, reinforced with 6 bands of 75 mm width woven black HDPE fibers fabric and coated with grey LDPE on the outside. Pre-punched 8mm holes on the 2 side bands at 0.1m +/-10% intervals, positioned in the Centre of the bands (only the reinforcement bands are pre-punched, not the tarpaulin itself). |
Weight | 190 +/- 20g under ISO 3801 (equivalent to min 170 to 210 gsm max) |
Tensile strength | Min 500N, 15-25% elongation in warp and weft in plain sheet under ISO 1421-1 |
Reinforcement bands | Min 700N as per ISO 1421-1, pulling lengthwise in a pre-punched 8mm hole with a hook of 8 mm wire diameter, at 200mm from the end of the band. UV resistance 80% of original value and not less than 665N. |
Tear strength | Min 100N under ISO 1421outside of the Reinforcement Bands. |
UV resistance | After 1500 hours UV under ASTM G53/94 (UVB 313 nm peak) minimum 80% of original value of the actual product and not less than 475N |
Welding | Only 1 welding lengthwise. |